Rockwell Automation 2727-G7P20D3Q7 MobileView G750 Guard Machine Terminal - Manual (Page 52)

Publication 2727-UM002D-EN-P
4-8 Configuring the MobileView Terminal
3. Tap Yes to continue past two warnings.
4. The image update starts.
The Updating Image dialog shows the progress of the update.
Tool Version
ATTENTION
!
After starting an update, do not cycle power or
remove the PC card until the update is
complete. If the update is interrupted, the
terminal will become inactive and can only be
initialized and updated using the BootP server.
Contact Technical Support for more
information.