Rockwell Automation 2727-G7P20D3Q7 MobileView G750 Guard Machine Terminal - Manual (Page 7)

1 Publication 2727-UM002D-EN-P
Preface
This preface provides information on:
• manual contents
• terminology
• intended audience
• intended uses
• European Communities (EC) Directive Compliance
• standards and agency certifications
• Rockwell Automation Support
Contents of Manual This manual is organized as follows:
Chapter Title Description
1 Overview Gives a general overview of the
MobileView Guard G750 and its features.
2 Safety Precautions and
Elements Describes safety precautions and safety
elements (enabling switch, emergency
stop switch) of the MobileView Guard
G750.
3 Terminal Connections Shows how to connect the MobileView
Guard G750 to the Junction Box, make
Ethernet, serial, and IrDA (keyboard and
printer) connections, use the PC Card slot,
and install the optional mounting bracket.
4 Configuring the MobileView
Terminal Provides details on how to use the
MobileView Configuration Tool to
calibrate operating elements. It also
provides details on how to transfer data
between the MobileView terminal and PC,
and install programs.
5 CE Thin Client Operating
Instructions Gives instructions on how to start up,
configure Ethernet settings, and power off
the MobileView Guard. It also gives
details on how to start terminal services.
6 Windows CE Applications Describes the Windows CE software
installed in the MobileView terminal,
generation of Windows CE programs, and
the MobileView Guard virtual channel.
7 Using RSView ME Station Describes the RSView ME Station
software installed in the MobileView
2727-G7P20D1Q6 and 2727-G7P20D3Q7
terminals.