Rockwell Automation 7000A PowerFlex Medium Voltage Drive (A-Frame) - Classic Control - Manual (Page 77)

Drive Installation 2-37
7000 “A” Frame 7000A-UM150F-EN-P – June 2013
The cabling cabinet of the drive with integral line reactor and input
starter is located in the left-hand section. The mounting and location
of the line reactor and input starter are shown along with customer
cable termination locations. The circulating fans for the cabinet are
located on top.
Note: The cabling cabinet with integral line reactor and input starter
has the same layout for 6-pulse and PWM rectifiers at 2400-6600
volt ratings. This cabinet is also available without integral starter
(see Figure 2.14). The width of the cabinet changes as a function of
the drive voltage ratings.
Figure 2.13 – Cabling Cabinet with Integral Line Reactor, With Input Starter
Line Cable Terminations
(behind Disconnect Switch)
Vacuum Contactor Assembly
Motor Cable Terminations
(Hall Effect Sensors behind)
Fused Disconnect Switch
AC Line Reactor
Disconnect Switch Operating Handle
Fan Power Transformer Assembly
Control Power Transformer
Current Transformers
Cabling Cabinet
(Integral Line Reactor
and Input Starter)