Rockwell Automation 2711E-ND1 Reference Manual PanelBuilder 1400e - Manual (Page 142)

136 Scrolling Lists
Publication 2711E-6.15 – November 1998
Cursor List with
Six Visible States
Cursor List Buttons
Local Message
Object List
Numeric Data
Display Object List
Note: Use the same font height (font sizes Large and Double High
are the same height; Small and Double Wide are the same height) for
the object lists that you use for the cursor list. Otherwise
PanelBuilder will display a validation error. You must also group the
cursor list and its Object List together before downloading the file, to
avoid validation errors.
The Object List’s width determines the size of the objects to be
displayed in the list:
•
For Multistate Indicator Object Lists, the size of the state label
determines the appropriate width of the list.
•
For Local Message Object Lists, the minimum width should be
the longest defined message that will be displayed.
•
For Numeric Display Data Object Lists, the minimum width
depends on the range of values you are expecting to display.
Note: You can size the Object List height to increase or decrease
the number of Visible States. However, you cannot size the
Object List to accommodate fewer states than the number of the
highest assigned Visible State control. For example, if you
assigned a tag to Visible State 5, you cannot size the list to
display fewer than 5 states. If you size the list to display fewer
than 5 states by entering a lower number in the Number of Visible
States field, you will receive a warning, and, if you choose to
proceed, Visible State controls with a higher number will be
deleted.
"
"