Rockwell Automation 2711E-ND1 Reference Manual PanelBuilder 1400e - Manual (Page 43)

33 Control Selectors
Publication 2711E-6.15 – November 1998
Configuring the Set Bit Cursor Point
Configure the Set Bit Cursor Point according to this table:
Field Meaning
Name Assign a name, up to 15 characters, to document the object for
printed reports. This increases the application’s size by 1 byte
per character.
Set Bit Control Set Bit Control records the status of the Set Bit Cursor Point.
You can only assign a tag to this control.
When it is selected, the control is set to 1. Otherwise it is 0.
Since this control uses only two values, a digital tag is
recommended.
You can adjust the size of the Set Bit Cursor Point’s display and
format the object’s foreground color, background color, font style,
border style, fill style, and blink attributes. For details on formatting
objects see “Changing Object Appearance” in Chapter 9, Creating
Objects, in the PanelBuilder 1400e Configuration Software for
Windows User Manual.
Note: If you use the Extra Large Font, the application will be
compatible only with PanelView Firmware Version 2 or later. The
application will not be compatible with earlier versions.
Note: If you use the Tiny Font or the Very Tiny Font, the
application will be compatible only with PanelView Version 5 or
later. The application will not be compatible with earlier versions.
"
"