Rockwell Automation 2711E-ND1 Reference Manual PanelBuilder 1400e - Manual (Page 160)

154 Scrolling Lists
Publication 2711E-6.15 – November 1998
Create the Set Command Input Rung
Rung 2:7 enables the Set Command function. When the Set
Command button is pressed, the currently displayed command value
is placed in the command variable address. This secures the new
command value when the cursor position or mode changes. This
rung also sets the Station Status file according to which command is
set.
Rung 2:7
1
[LBL]
MANUAL
MODE
B40
] / [
1
SET COMND
BUTTON
N30:3
] [
MOV
MOVE
Source
Dest
MOV
MOVE
Source
Dest
1
N33[N30:1]
1
N34[N30:1]
1
1
EQU
EQUAL
Source A
Source B
0
N34[N30:1]
1
N31:202
1
MOV
MOVE
Source
Dest
4
N33[N30:1]
1
N34[N30:1]
1
2
EQU
EQUAL
Source A
Source B
23703
PRE-TOGGLE
LATCH
B40
] [
6
Create the Option Style Number Input Rung
When the operation is in Manual mode and the numeric keypad
enable object Enter key is pressed, Rung 2:8 transfers the new
Option style number value to the currently selected station’s option
style address. The PLC ladder logic uses the Cursor Indicator address
as its pointer.
23722
Rung 2:8
MANUAL
MODE
B40
] / [
1
CHANGE
STYLE NO.
ENTER KEY
N30:3
] [
MOV
MOVE
Source
Dest
6 N30:4
0
N35[N30:1]
100