Rockwell Automation 2711E-ND1 Reference Manual PanelBuilder 1400e - Manual (Page 70)

64 Numerics
Publication 2711E-6.15 – November 1998
Example 2: Displaying an Integer Value
The Displayed Value control has an integer value. The value displayed
depends on the assigned Decimal Display option and the value of the
Polarity control.
The following table illustrates how the Decimal Display option determines the
display. The Displayed Value control is set to 3124.
If Polarity is unassigned, and the
Decimal Display option is set to This value is displayed
Disabled 3124
Implicit 3124
PLC Controlled at 1 digit 312.4
Fixed Position at 5 digits .03124
The following table illustrates how the value of the Polarity control
determines the display. The Displayed Value control’s value is –3124.
If the Decimal Display is set to Implicit,
and the Polarity control is this value This value is displayed
Unassigned –3124
0 3124
1 –3124