Rockwell Automation 2711E-ND1 Reference Manual PanelBuilder 1400e - Manual (Page 174)

170 Trends
Publication 2711E-6.15 – November 1998
Tip: Use the Scale object to provide a scale along the axes of the
Trend object, as shown in the example below. Configure the number
of ticks in the Scale to correspond to the frequency with which the
Trend is updated and to represent the value ranges of the activity you
are tracking.
Note: When placing the Trend object on the screen, ensure that no
other objects overlap it. Objects overlapping a Trend object will
cause an error when the application is validated.
"
"