Rockwell Automation 2711E-ND1 Reference Manual PanelBuilder 1400e - Manual (Page 23)

12 ASCII Inputs
Publication 2711E-6.15 – November 1998
To enter a value and send it to the PLC:
1. Activate the desired ASCII Input object.
2. Enter the value.
3. Use the Enter key to send the value to the PLC.
Keyboard Keys Supported by the ASCII Input Objects
ASCII Input Object Character Buttons Corresponding Keyboard Keys
A to Z A to Z
a to z a to z
0 to 9 0 to 9
+–=( ){ }[ ]< > / \ $ & @ ’ ”,.;: ? ! % # *_ | ^
~ +–=( ){ }[ ]< > / \ $ & @ ’ ”,.;: ? ! % # *_ | ^
~
ENT Enter
SHF Shift
CAPS Caps Lock
INS Insert
DEL Delete
CLR Esc
SEL replaced by keystroke
four way arrow keys
(keypad terminal only) left arrow right arrow
up arrow down arrow
<< >>
(large ASCII for touch screen terminals
only) left arrow right arrow
<< >>
(small ASCII for touch screen and
small and large ASCII for keypad terminals) not supported
SPACE Spacebar, as long as a Cursor Point object
is not on the same screen
SPACE touch SPACE button on touch screen
(for large ASCII Input objects only)
not available Backspace
F1 to F21 (keypad terminal only) not supported
not supported all other keys