Rockwell Automation 2711PC-xxxx PanelView Plus 6 Compact Terminals User Manual - Manual (Page 127)

Rockwell Automation Publication 2711PC-UM002B-EN-P - April 2014 127
Connections and Communication Chapter 6
Use only hi-speed USB 2.0 certified cables for error-free transmissions.
Connect only externally-powered USB hubs to the terminal. Before attaching
devices to a USB hub, make sure the power adapter is connected and powered on.
Ethernet Connection The Ethernet port connects to a controller on an EtherNet/IP network by using
standard Ethernet and network connections. The port also supports application
transfers and printing.
Ethernet Connector
The Ethernet port has an RJ45, 10/100Base-T connector for network
communication and supports MDI/MDI-X connections.
WARNING: USB devices not powered by the USB port must be within the same
enclosure as the terminal. USB devices must be connected to a ground system
common with the terminal or used with a USB hub providing galvanic isolation.
TIP The 2711P-RN20 Ethernet communication module is available for the
1000 terminals if another Ethernet port is required. The module has its own
unique IP address.
Table 41 - Ethernet Connector Pinout
Connector Pin Pin Name Pin Pin Name
RJ45 Connector 1 Transmit + 5 Unused
2 Transmit – 6 Receive –
3 Receive + 7 Unused
4 Unused 8 Unused
Table 42 - Ethernet Status Indicators
Indicator Color Description
Link Integrity Yellow On when a link is present.
Activity Green Blinks when activity is detected on Ethernet link.
1 8
Yellow
indicator
Green
indicator