Rockwell Automation 2711PC-xxxx PanelView Plus 6 Compact Terminals User Manual - Manual (Page 50)

50 Rockwell Automation Publication 2711PC-UM002B-EN-P - April 2014
Chapter 3 Configuration Mode
Set the Ethernet Link Speed
You can set the speed and duplex setting of the Ethernet link.
1. Press Terminal Settings>Networks then Communications>Network
Connections>Network Adapters.
2. Press Settings to view or modify the Ethernet link settings.
3. Press Ethernet Configuration to select an Ethernet link option for your
Ethernet connection.
The Auto option automatically senses the link option and speed based on
the terminal connection to a network.
Define Name Server Addresses
You can define name server addresses for the EtherNet/IP network adapter.
These addresses are automatically assigned if DHCP is enabled for the adapter.