Rockwell Automation 2711PC-xxxx PanelView Plus 6 Compact Terminals User Manual - Manual (Page 14)

14 Rockwell Automation Publication 2711PC-UM002B-EN-P - April 2014
Chapter 1 Overview
Operator Input The terminals feature grayscale or color LCD displays with keypad, touch screen,
or keypad and touch-screen input.
1
2
3
4 5
1
2
Table 4 - Display and Operator Input Features
Item Feature Description
1 Product label Product identification label can be replaced with custom label.
2 Display/touch screen
Color or grayscale display with or without a resistive, 4-wire, touch screen (catalog
number dependent)
3 Numeric keypad 0…9, Backspace, Enter, Left and Right Tab, Esc, Shift, Ctrl, Alt keys
4 Navigation keys
Use arrow keys for navigation. Use Alt+arrow to initiate these functions:
• Alt+left arrow (Home), Alt+right arrow (End)
• Alt+up arrow (Page Up), Alt+down arrow (Page Down)
5
Function keys
F1…F8 Keys that can be configured in the application to perform operations. For example,
F1 can be configured to navigate to another screen.
ATTENTION: Use a finger or gloved-finger to operate the keypad. To operate
the touch screen, use a finger, gloved-finger, or plastic stylus with a minimum
tip radius of 1.3 mm (0.051 in.). If you use any other object or tool you can
damage the keypad or touch screen.
ATTENTION: Do not carry out multiple operations simultaneously. Doing so can
result in unintended operation:
• Touch only one operating element on the screen with one finger at one time.
• Press only one key on the terminal at one time.