7 - firmware upgrades, Terminal firmware, Chapter 7 – Rockwell Automation 2711PC-xxxx PanelView Plus 6 Compact Terminals User Manual User Manual
Page 135: Firmware upgrades, Chapter
Rockwell Automation Publication 2711PC-UM002B-EN-P - April 2014
135
Chapter
7
Firmware Upgrades
Terminal Firmware
Firmware components are packaged as execute-in-place (XIP) regions in a single
System Code (SC) .img file. When the SC .img file is copied to the Virtual File
System (VFS) on the terminal, the terminal's XIP regions are updated and the
terminal restarts automatically. These firmware components are affected during
an upgrade:
• FactoryTalk View Machine Edition Station software
• Communication protocols and drivers including Kepware drivers
• Windows fonts
• Windows CE components
• FactoryTalk components
• User extensions
A firmware upgrade does not affect these terminal components or settings:
• Windows registry
• File system including the FactoryTalk View Machine Edition application
loaded in the terminal
• Network parameters including the network device name, DHCP-enabled
and static IP addressing, speed, and duplex setting
• Display settings
• Screen saver configuration
• Touch-screen calibration
Topic
Page
Upgrading Terminal Firmware from a Storage Device