Rockwell Automation 2711PC-xxxx PanelView Plus 6 Compact Terminals User Manual - Manual (Page 55)

Rockwell Automation Publication 2711PC-UM002B-EN-P - April 2014 55
Configuration Mode Chapter 3
Display Settings For the terminal display, you can adjust its intensity, view its temperature,
configure the screen saver, or enable/disable the screen cursor.
Adjust the Display Intensity
You can modify the intensity of the terminal backlight. You can use the default
intensity of 100% or you can change the intensity for runtime operations.
1. Press Terminal Settings>Display>Display Intensity.
2. Press Startup Intensity to switch between the Default intensity and the
Runtime intensity:
• If you select Runtime, the start-up screens use the runtime intensity.
• If you select Default, the start-up screens use the default setting, 100%.
3. Increase or decrease the intensity for runtime operations, by pressing the
up or down arrow keys.
4. Press OK when done to save the intensity changes.