Rockwell Automation 2711PC-xxxx PanelView Plus 6 Compact Terminals User Manual - Manual (Page 87)

Rockwell Automation Publication 2711PC-UM002B-EN-P - April 2014 87
Windows CE Operating System Chapter 4
System Information The System Information dialog box provides tabs to view and set system-wide
properties for your terminal.
General Information
The
General tab of the System Information dialog box shows the current version
of the Windows CE operating system, the processor type and speed, and RAM
memory on terminal.
Startup Options
The Startup Options tab of the System Information dialog box lets you set these
options at startup:
• Show or hide battery warning
• Launch the platform as open or closed system
• Disable or enable Safe mode request
• Show or hide system watchdog errors
Battery Warnings
If the battery is low, missing, or dead, a warning
displays each time the terminal starts up.
TIP • The terminal can be operated without a
battery if it is not required that the time and
date be accurate.
• When replacing the battery, you can verify
the accuracy of the system date and time
from the desktop control panel or the
terminal settings in FactoryTalk View ME
Station Configuration mode.
Texas Instruments, C
1000 MHz
198004 KB
02.10