Rockwell Automation 2711PC-xxxx PanelView Plus 6 Compact Terminals User Manual - Manual (Page 133)

Rockwell Automation Publication 2711PC-UM002B-EN-P - April 2014 133
Connections and Communication Chapter 6
Table 51 - Communication Cables: PanelView Plus 6 Compact Terminals to Interface Modules
Protocol PanelView Plus 6 Comm Port 1747-AIC
1761-NET-AIC 1761-NET-ENI
Port 1
(9-pin)
Port 2
(8-pin Mini DIN)
Port 3
(DH-485)
Port 2
(8-pin Mini DIN)
DF1
RS-232 port (9-pin)
All terminals — 2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
2711-NC21 (5 m/16 ft)
2711-NC22 (15 m/49 ft)
Null modem required
—
1761-CBL-AP00 (5 m)
1761-CBL-PM02 (2 m)
2711-CBL-PM05 (5 m)
2711-CBL-PM10 (10 m)
DH-485
RS-232 port (9-pin)
All terminals
—
2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
2711-NC21 (5 m/16 ft)
2711-NC22 (15 m/49 ft)
Null modem required
—
DH-485 port
1000 terminals only
Require 2711P-RN6, 2711P-RN6K Direct connection to single
AIC with
Belden 9842 cable (1)
— —
Direct connection to
single AIC+ with
Belden 9842 cable (1)
—
(1) Use serial port on the PanelView Plus 6 Compact terminal with an AIC+ module for a DH-485 network solution.