Rockwell Automation 2711PC-xxxx PanelView Plus 6 Compact Terminals User Manual - Manual (Page 70)

70 Rockwell Automation Publication 2711PC-UM002B-EN-P - April 2014
Chapter 3 Configuration Mode
Change the Time Format for a Language
Follow these steps to change the time format for the selected language.
1. Press Terminal Settings>Time/Date/Regional Settings>Regional
Settings>Time Format.
The current time is shown in the currently selected format.
2. Press the appropriate selections to adjust the formats.
3. Press OK.
Field Description Example
Time Format
h:mm:ss tt (default)
h = hour, no leading zero
tt = AM or PM symbol 7:23:02 AM or 1:13:31 PM
11:43:59 AM
hh:mm:ss tt
hh = hour with leading zero
tt = AM or PM symbol 07:23:02 AM or 01:13:31 PM
11:43:59 PM
H:mm:ss
H = hour in 24-hour format, no leading zero 7:03:42 or 1:13:32
23:43:59
HH:mm:ss
HH = hour in 24-hour format with leading zero 07:03:42 or 01:13:22
23:43:59
AM Symbol Characters to indicate AM. If the time format is set to
h:mm:ss tt or hh:mm:ss tt, you can modify the AM
symbol. AM (default)
12 character max
PM Symbol Characters to indicate PM. If the time format is set to
h:mm:ss tt or hh:mm:ss tt, you can modify the PM
symbol. PM (default)
12 character max
Separator Characters that separate fields in time format. : (default)
3 character max