Rockwell Automation 5370-UPK CVIM USER-PAK Option - Manual (Page 10)

Chapter 2
Introduction to the USER–PAK Option
2–2
The USER–PAK option enables access to four different levels of interaction;
we refer to these different levels as “security levels.” The different security
levels allow for implementation of a hierarchical system of access to and
responsibility for the CVIM module setup.
Three security levels are defined within the setup mode, each allowing a
different level of interaction with CVIM / USER–PAK features:
•
ADMINISTRATOR – Full access to CVIM / USER–PAK features.
•
MANAGER – Mid–level access to CVIM / USER–PAK features.
•
USER – Lower–level access to CVIM / USER–PAK features.
Access to the above security levels is controllable through the assignment of
a specific password for each level.
Access to CVIM runtime menus and displays does not require a password –
this “runtime” level of interaction can be considered as a fourth level of
security.
The USER–PAK option allows the ADMINISTRATOR to modify the CVIM
module user–interface in two ways – through deletion of menu items from
the CVIM pop–up menus, and/or modification of text.
Deletion: A menu item is marked for deletion at the ADMINISTRATOR
level; menu items marked for deletion do not appear on the monitor screen at
the USER level. Any subsequent menu(s) that would have been accessible
through the use of the deleted menu item are unavailable as well.
“Trash can”
icon open
(icon is green when open)
Delete function
enabled
To enable the delete function, you pick the “trash can” icon, which appears at
the ADMINISTRATOR level; then you select or “mark” menu items for
deletion.
Custom Menu
Modifications