Accessing setup mode with user-pak installed, Accessing setup mode with user–pak installed – Rockwell Automation 5370-UPK CVIM USER-PAK Option User Manual
Page 18
Advertising
![background image](/manuals/580467/18/background.png)
Chapter 3
Installation
3–5
Upon installation of the USER–PAK option, access to the setup mode
requires the use of a password. The password is entered through a pop–up
keyboard which appears when you pick the
Setup
box:
Password entry
keyboard
Note: The password requirement for entry can be disabled; see Chapter 4 for
more information on entering the setup mode.
Accessing Setup Mode
with USER–PAK Installed
Advertising