Rockwell Automation 5370-UPK CVIM USER-PAK Option - Manual (Page 124)

A–B
10
Chapter
10–1
Loading CVIM / USER–PAK Configurations
Contents
Chapter Objectives 10–1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Loading CVIM / USER–PAK Configurations 10–1 . . . . . . . . . . . . . . . . . . . . . .
Checking Available Memory 10–3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This chapter describes the additional options for loading specific portions of
the CVIM / USER–PAK configurations which become available when the
USER–PAK option is installed.
With the USER–PAK option installed, several new options are available for
loading configurations. These new options allow you to load specific
portions of either an internally–stored configuration or the default
configuration (to become part of the current working configuration).
When you select either the Load Config. (Int) box or the Load Default
Config. on the Archival menu, these items are listed:
•
Menus* – Selecting this option loads only the menu modifications (text
modifications and/or deletions) defined by the ADMINISTRATOR.
•
Viewports / Serial Ports – Selecting this option loads only the serial
ports and/or viewports.
•
Inspection – Selecting this option loads the entire CVIM configuration,
outside of the two USER–PAK–related portions listed above.
•
All CVIM* – Selecting this option loads the entire CVIM configuration,
consisting of all three portions above.
* Note: This option is available at the ADMINISTRATOR level only.
When you load a specific portion of the internal or the default configuration,
the corresponding portion of the RAM (current working) configuration is
overwritten. The remaining portions of the RAM configuration remain intact
and unaffected by the load.
The ability to load specific portions of a saved configuration enables you to
incorporate parts of a previous configuration with your current configuration.
This can save you time and effort in building a configuration.
To load a specific portion of the default configuration or internally–stored
configuration:
•
Pick Misc
→
Archival to access the Archival menu.
•
Pick the desired feature ( Load Config. (Int) or Load Default Config. )
on the Archival menu.
Chapter Objectives
Loading CVIM / USER–PAK
Configurations