Rockwell Automation 5370-UPK CVIM USER-PAK Option - Manual (Page 125)

Chapter 10
Loading CVIM / USER–PAK Configurations
10–2
•
Pick the appropriate box ( Menus , Viewports / Serial Ports , Inspection ,
or All CVIM ) on the respective menu.
Archival menu
Load Config ( Int )
menu
Picking any of the four boxes causes this message to appear:
•
Pick the same box again to load the configuration.
When the loading is completed, the message reads “Configuration
Loaded.”
Warning Message: Before loading the selected configuration option, the
CVIM module checks to see if there is enough room remaining in the
allocated memory for the current configuration. If the portion of the
configuration you are loading will not fit into the remaining memory, the
load will not occur, and this message will appear:
In order to load the configuration in this case, you must first adjust your
current working configuration to free up the required memory space.