Rockwell Automation 5370-UPK CVIM USER-PAK Option - Manual (Page 20)

Chapter 4
Getting Started / Using the Security Levels
4–2
instance, a system “administrator” can be designated; this person would have
access to the ADMINISTRATOR level. The ADMINISTRATOR could be
responsible for creating restrictions to the menu items available at the user
level (through menu item deletion), for modifying menu item text, and for
maintenance and security of the passwords which allow access to the
different levels.
A “manager” can be designated, having access to the MANAGER level (that
is, having access to any deleted menus items). Designated “users” would
have access to the USER level; a “user” cannot, for example, modify menus,
change passwords, or set security ON or OFF. The “user” is able to use the
other USER–PAK and base CVIM module capabilities, except those deleted
from the menus at the system administrator level. Finally, at the “runtime”
level, only use of runtime menus and displays is available.
How do you enter a password for access to the setup mode?
You enter the password through the password keyboard; this keyboard
appears automatically when you select
Setup on the runtime screen.
What happens if a password is lost?
Entry to the setup mode can be enabled through the use of the USER–PAK
Installation/Key card, should passwords be lost. See “Lost Passwords –
Using the Installation/Key Card” later in this chapter.
After USER–PAK installation, accessing the setup mode requires entry of a
password (unless security has been turned off – see “Setting Security
ON/OFF” later in this chapter).
To enter the setup mode from run mode or standby mode:
•
Pick the Setup box on the runtime display, which causes the password
keyboard to appear.
•
Enter the appropriate password on the keyboard, and then pick Ret .
Accessing the Setup Mode