Rockwell Automation 2080-LC50 Micro800 Controllers: Getting Started with CIP Client Messaging - Manual (Page 10)

4 Rockwell Automation Publication 2080-QS002A-EN-E - April 2013
Chapter 1 Create a Micro800 Project
Create a Micro800 Project in Connected Components Workbench
Launch the Connected Components Workbench software.
1. On the Device Toolbox, expand
the list of Controllers by clicking
the + sign.
Be sure to select the catalog
number that matches your
Micro850 controller.
2. Select major revision 4 when
manually adding a
Micro850 controller.
TIP If your controller is online, use the Discover feature to
automatically discover your controller.