Rockwell Automation 2080-LC50 Micro800 Controllers: Getting Started with CIP Client Messaging - Manual (Page 58)

52 Rockwell Automation Publication 2080-QS002A-EN-E - April 2013
Appendix F Programming Tips and Recommendations for Micro800 CIP Messaging Instructions (MSG)
2. Connected Components Workbench flexibly supports Array elements
starting from 0 or any non-zero number. Below are some valid examples.
3. When copying the source array from the middle of an array, use SrcOffset
to specify how many elements you need to offset. For example, if the
Source array is SrcArray[1..5] and SrcOffset is 2, then the first element to
be copied to destination is array[3].
IMPORTANT Array in Connected Components Workbench is defined as
ArrayName[x...y], where:
x – Starting element number
y – End element number