Rockwell Automation 2080-LC50 Micro800 Controllers: Getting Started with CIP Client Messaging - Manual (Page 45)

Rockwell Automation Publication 2080-QS002A-EN-E - April 2013 39
Appendix
B
MSG_CIPGENERIC Function Block
This diagram shows the arguments in the MSG_CIPGENERIC function block.
The following table explains the arguments used in this function block.
MSG_CIPGENERIC Parameters
Parameter Parameter
Type Data Type Description
IN Input BOOLEAN If Rising Edge (IN turns from 0 to 1), starts function block and the precondition is that last operation
is completed.
CtrlCfg Input CIPCONTROLCFG Control Configuration. This is a structured data type, it consists of the following elements:
• CtrlCfg.Cancel (Boolean)
- When this value is true, the execution of MSG_CIPGENERIC is cancelled.
- The bit is cleared when message is enabled.
• CtrlCfg.TriggerType (UDINT)
- If set to “0”, then the message only trigger once when “IN” is true.
- If set to 1 to 65535 (unit : milliseconds), then triggers periodically when “IN” is true. For
example a value of 100 means when “IN” is true, the message is triggered every 100
milliseconds.
• CtrlCfg.StrMode (USINT)
- Reserved.