Rockwell Automation 2080-LC50 Micro800 Controllers: Getting Started with CIP Client Messaging - Manual (Page 35)

Rockwell Automation Publication 2080-QS002A-EN-E - April 2013 29
Use CIP Generic Client Messaging Chapter 3
4. Set the value for the
A_TargetCfg input variable as
shown.
See
TargetCfg on page 40 for
parameter details and
description.
5. Build and download the project
to Controller A.
TIP ReqData and ReqLength Input Variables
As this project only needs to read the destination value, there is no need
to assign values to the input variables, A_ ReqData and A_ReqLength.
See ReqData on page 40 and ReqLength on page 40 for parameter
details and description.
IMPORTANT ResData Input Variable
This is an output parameter that stores the response data in USINT
array format.
In our example, we are reading the catalog number string. When it
is stored as USINT array, it will follow the ODVA short string
format which is the first element in the array that will specify the
string length. The next array elements will store the string
character’s HEX value.
For a string the maximum number of character is 80, plus the
length element, so we could define the A_ResData as 1 dimension
array with 81 elements.
See ResData on page 41 for parameter details and description.