Rockwell Automation 2080-LC50 Micro800 Controllers: Getting Started with CIP Client Messaging - Manual (Page 25)

Rockwell Automation Publication 2080-QS002A-EN-E - April 2013 19
Use CIP Symbolic Client Messaging Chapter 2
9. Create a second rung. From the
Toolbox by selecting rung and
drag it onto the space just below
the first rung.
10. Add ConvertData contact to the
rung. To do this, select Direct
Contact from the Toolbox and
drag it onto the rung as shown.
11. Add COP instruction to the
rung.
12. Create or specify
values/variables for the COP
input parameters as shown.
To learn more about the COP
input and output parameter
descriptions, see
COP Function
Block on page 43 .
IMPORTANT ValueFromB input variable is a one-dimensional array with one element.