Rockwell Automation 2080-LC50 Micro800 Controllers: Getting Started with CIP Client Messaging - Manual (Page 59)

Rockwell Automation Publication 2080-QS002A-EN-E - April 2013 53
Programming Tips and Recommendations for Micro800 CIP Messaging Instructions (MSG) Appendix F
4. To store copied data to the Destination array, start at the middle of the
array. Use DestOffset to specify how many elements you need to offset.
For example, if the Destination array is DestArray[1..3] and SrcOffset is 1,
then the first location to store copied data is DestArray[2].
SrcArray[1 …5]
USINT DestArray[1 …3]
USINT
SrcArray[1 …5]
USINT DestArray[1 …3]
USINT
COP Instruction