1 - create a micro800 project, Create a micro800 project, Introduction – Rockwell Automation 2080-LC50 Micro800 Controllers: Getting Started with CIP Client Messaging User Manual
Page 9: Before you begin, What you need
Advertising
Rockwell Automation Publication 2080-QS002A-EN-E - April 2013
3
Chapter
1
Create a Micro800 Project
Introduction
In this chapter, you will create a Micro850 controller project through the Connected Components Workbench.
Before You Begin
Ensure that you have properly installed revision 4 of the Connected Components Workbench.
What You Need
• Connected Components Workbench revision 4 or later
• Firmware revision 4 and later
Advertising
This manual is related to the following products: