Rockwell Automation 2080-LC50 Micro800 Controllers: Getting Started with CIP Client Messaging - Manual (Page 11)

Rockwell Automation Publication 2080-QS002A-EN-E - April 2013 5
Create a Micro800 Project Chapter 1
3. Drag your controller onto the
Project Organizer pane.
4. Go to File → Save Project As.
5. Provide a project name for your
project. Click OK.
TIP Any Micro830/Micro850 controller can be used to follow the quickstart
instructions described in this publication as long as it meets the software
and firmware compatibility requirements for the Micro800 CIP
Messaging feature. See
Hardware and Software Compatibility on
page 1 .