Rockwell Automation 2080-LC50 Micro800 Controllers: Getting Started with CIP Client Messaging - Manual (Page 16)

10 Rockwell Automation Publication 2080-QS002A-EN-E - April 2013
Chapter 2 Use CIP Symbolic Client Messaging
9. Add ConvertData contact to the
rung by selecting Direct Contact
from the Toolbox and drag it
onto the rung as shown.
10. Create a second rung. From the
Toolbox, select Rung and drag it
onto the space just below the
first rung.
11. Add = instruction block to the
rung.
COP Input Parameters
Variable Data Type Dimension Init Value
ValueToWrite DINT [1...1] 987654321
A_Data USINT [1...4]
COPsts UINT
ConvertData BOOL
WriteValue BOOL