Rockwell Automation 2080-LC50 Micro800 Controllers: Getting Started with CIP Client Messaging - Manual (Page 34)

28 Rockwell Automation Publication 2080-QS002A-EN-E - April 2013
Chapter 3 Use CIP Generic Client Messaging
Assign Values to MSG_CIPGENERIC Input Variables
1. Set the values for the input
variables through the Initial
Value column of the Global
Variables table.
See MSG_CIPGENERIC
Function Block on page 39 for
details and description of the
function block parameters.
2. Set the value for the A_CtrlCfg
input variable as shown.
See
CtrlCfg on page 39 for
parameter details and
description.
In this example, we just need to
know the catalog number once,
and set A_CtrlCfg.TriggerType
initial value to 0.
3. Set the value for the A_AppCfg
input variable as shown.
See
AppCfg on page 40 for
parameter details and
description.