Rockwell Automation 2080-LC50 Micro800 Controllers: Getting Started with CIP Client Messaging - Manual (Page 26)

20 Rockwell Automation Publication 2080-QS002A-EN-E - April 2013
Chapter 2 Use CIP Symbolic Client Messaging
Assign Values to the MSG_CIPSYMBOLIC Input Variables
1. Set the values for the input
variables through the Initial
Value column of the Global
Variables table.
2. Set the value for the A_CtrlCfg
input variable as shown.
See
CtrlCfg on page 35 for
parameter details and
description.
Set A_CtrlCfg.TriggerType as
300 ms. Set A_CtrlCfg.Cancel
to False. By default, this
parameter is set to False.
3. Set the value for the A_SymCfg
input variable as shown.
See
SymbolicCfg on page 36 for
parameter details and
description.
Leave the default initial value of
A_SymCfg.Count at 0.
See MSG_CIPSYMBOLIC Function Block on page 35 for more information about MSG_CIPSYMBOLIC parameters.