Rockwell Automation 2080-LC50 Micro800 Controllers: Getting Started with CIP Client Messaging - Manual (Page 32)

26 Rockwell Automation Publication 2080-QS002A-EN-E - April 2013
Chapter 3 Use CIP Generic Client Messaging
8. Add ConvertString coil to the
end of the rung by selecting
Direct Coil from the Toolbox
and add it to the rung as shown.
9. Create a second rung. From the
Toolbox by selecting rung and
drag it onto the space just below
the first rung.
10. Add COP instruction to the
rung by typing COP on the
Instruction Block Selector
window that appears to filter the
COP function block. Choose
COP. Then, click OK.
11. Create the COP input variables
as shown.
For more information about
COP input and output
parameters, see
COP Function
Block on page 43 .
Data Type:
String, 1
Dimensional
Array with 1
Element