Right-click cip_sym program, and then choose open, Choose cop. then, click ok – Rockwell Automation 2080-LC50 Micro800 Controllers: Getting Started with CIP Client Messaging User Manual
Page 15
Rockwell Automation Publication 2080-QS002A-EN-E - April 2013
9
Use CIP Symbolic Client Messaging Chapter 2
3. On the Project Organizer pane,
right-click Programs, and then
select Add New LD: Ladder
Diagram.
You can press F2 to rename the
program. Press Enter.
4. Right-click CIP_Sym program,
and then choose Open.
5. From the Toolbox, double-click
Block to add it to the rung.
Alternatively, you can drag and
drop Block onto the rung.
Your ladder rung should appear
as shown.
6. Add COP instruction to the
rung by typing COP on the
Instruction Block Selector
window that appears to filter the
COP function block.
7. Choose COP. Then, click OK.
8. Create variables for the COP
input parameters as shown.
To learn more about the COP
input and output parameter
descriptions, see
on page
TIP
You can disregard the yellow warning sign that appears. This
indicates that the software expects a different data type.