Rockwell Automation 2080-LC50 Micro800 Controllers: Getting Started with CIP Client Messaging - Manual (Page 30)

24 Rockwell Automation Publication 2080-QS002A-EN-E - April 2013
Chapter 3 Use CIP Generic Client Messaging
Create CIP Generic Message Program
At the end of these instructions, you should have created the following program in Connected Components Workbench.
Build the Code
1. Open the project you have
created for Controller A in
chapter 1, through Connected
Components Workbench.
2. On the Project Organizer pane,
right-click Programs by selecting
Add New LD: Ladder Diagram.
You can press F2 to rename the
program to CIP_Gen. Press
Enter.
RUNG 1
Use MSG_CIPGENERIC to retrieve catalog
information
RUNG 2
Use COP to convert the catalog information into
human readable string