Rockwell Automation FactoryTalk Scheduler Users Guide - Manual (Page 129)

D • T IME P ATTERN E DITORS
123
•
•
•
• •
We’ll leave the Default Value as the Unavailable state. Next click on the button to the
right of the Duration field to open the Time Pattern Duration dialog. Select the Custom
option for the Duration Type and change the duration time to be 8 hours, as shown
below.
At this point, we have defined a time pattern for a resource, which is unavailable for entire
eight hours. Now we go to the Time Span section and double-click anywhere in the grid
section to open the Time Span dialog. Select State for the Value Type field. Now select
your new state, My On Shift, for the value field and change the start time to 0 and the end
time to 8 hours, as shown below.