Rockwell Automation FactoryTalk Scheduler Users Guide - Manual (Page 84)

F ACTORY T ALK S CHEDULER U SER ’ S G UIDE
78
• •
•
•
•
Holding your cursor over the chart will display the
legend. In this case, the bars represent the idle, process,
off, and setup (in that order). You also have several
other options available. You can display these by
pointing at the chart and right-clicking. This gives you
the options shown, which include showing the data.
If you select the Show Data option, a Chart Data
window is displayed showing the data that was used to
develop the chart. The Chart Data window for our
Machiner resource utilization chart is shown below.
You might question why your process utilization is so low. Part of the reason is that the
utilization values shown are for the entire 19-day time period (February 9 to February 27).
You can change the chart horizon by selecting the View > Chart Horizon menu option. If
we change the chart horizon so that we only consider the second full work week, Monday,