Rockwell Automation 2LW3000 LonWorks Communication Option Module for VTAC 7 Drives - Manual (Page 11)

Getting Started 2-1
C
HAPTER
2
Getting Started
This chapter provides:
• A description of the LonWorks module’s components
• A list of parts shipped with the module
• A list of user-supplied parts required for installing the module
• An installation checklist
Œ
Ribbon Cable
Connector Connects the module to the drive.

Terminal Block A 5-screw terminal block connects the
module to the network.
Ž
Service Pin A pushbutton identifies the node during
installation. See chapter 5, Installing
the Drive on the Network.

Status Indicators Four LEDs indicate the status of the
connected drive, module, and network.
See chapter 7, Troubleshooting.
Figure 2.1 – Components of the LonWorks Module
Œ

Ž
