Rockwell Automation 2LW3000 LonWorks Communication Option Module for VTAC 7 Drives User Manual
Page 65
Advertising
Operating the Drive Using a LonMark Profile
7-13
Generic Parameter Register Setting, Read
Definition:
network input config SNVT_count nciParRdAddress;
Explanation:
Selects register in the drive to read. The first digit is the drive
drop number. The remaining digital represent the register. For
example, 203 = drop 2, register 3. See section 8.6 for more
information.
Default:
Read from drive
Range:
000-063 = Drop 0
100-163 = Drop 1
200-263 = Drop 2
300-363 = Drop 3
Speed Setpoint Scaling Default Value
Definition:
network input config SNVT_lev_percent nciDrvSpeedScale
Explanation:
Sets its (?) value to nviDrvSpeedScale on every start up. See
Speed Setpoint Scaling in section 7.1.
Range:
-163% to 163%
Default:
0
Advertising