Rockwell Automation 2LW3000 LonWorks Communication Option Module for VTAC 7 Drives User Manual
Page 33
Advertising
Installing the LonWorks Module in the Drive
3-19
Step 5.6 Replace the terminal cover (below the keypad). Fasten it using the M4
screws removed earlier.
Step 5.7 Reinstall the Power Module in the drive cabinet.
Step 5.8 Close the outer cabinet door.
Figure 3.9 – Regulator Board’s Connection to LonWorks Module, Keypad, and Base Board
Regulator Board
Top View
Ribbon Cable
Connecting
Regulator Board and
Base Board
To Base Board
Front
Metal Screw
Ribbon Cable
Connector to
Connect Base
Board
Ribbon Cable
Connector to
Connect Keypad
Plastic Rivet
Terminal Strip
Back Side of
Insulator
Rear View of Regulator Board
Regulator Board
LonWorks
Ribbon Cable
Connector to
Connect
LonWorks
Module
Ribbon Cable
Connecting
Regulator Board
and LonWorks
Module
Advertising