Rockwell Automation 2LW3000 LonWorks Communication Option Module for VTAC 7 Drives - Manual (Page 74)

9-4 LonWorks Module for VTAC 7 Drives
Error LonWorks Module LED 1 Corrective Action
RAM error Three red flashes, then
constant red. The software
has detected a RAM
checksum error and has not
started the application and
never will. Unrecoverable fault. Try
restart.
Flash error. Six red flashes, then constant
red. The software has
detected a Flash checksum
error and has not started the
applicaiton and never will. Unrecoverable fault. The
software has been
damaged.
Hardware error. Red. Software application was
not started. Unrecoverable fault. The
module may have been
seriously damaged.
Drive cannot be fully
accessed. Not all drive
drop registers can be
accessed. Drop0 Reg 13
is not equal to 3 or
Drop0 Reg12 = 0. Red 2 Hz Check the drive. Check
the setting of parameter
P.061.