Rockwell Automation 2LW3000 LonWorks Communication Option Module for VTAC 7 Drives User Manual
Page 62
7-10
LonWorks Module for VTAC 7 Drives
Minimum Send Time
Definition:
network input config SNVT_time_sec nciMinOutTim;
Explanation:
Selects the minimum period of time that expires before the
network output variables can be resent. This is good for limiting
use of bandwidth on the LonWorks channel. NciMinOutTm
parameter overrides nciSndHrtBt.
Range:
0.0 (Disabled) to 6,5553.4 seconds
Default:
0.0 (Disabled)
Location Label
Definition:
network input config SNVT_str_asc nciLocation;
Explanation:
Can be used to provide more descriptive physical location
information than can be provided by the Neuron chip’s 6-byte
location string. The location relates to the object and not to the
node.
Default:
Empty spaces
Motor Nominal Speed
Definition:
network input config SNVT_rpm nciNmlSpeed;
Explanation:
Provides the nominal speed (RPM) of the motor. This is used
only when the drive is in Vector mode.
(Not used in VTAC?)
Default:
Read from drive
Nominal Frequency
Definition:
network input config SNVT_freq_hz nciNmlFreq
Explanation:
Provides the nominal frequency of the motor. This value is
necessary to determine the minimum and maximum frequency.
Default:
Read from drive