Rockwell Automation 2LW3000 LonWorks Communication Option Module for VTAC 7 Drives User Manual
Page 57
Advertising
![background image](/manuals/581428/57/background.png)
Operating the Drive Using a LonMark Profile
7-5
.
Run/Jog Select
Definition:
network input SNVT_switch nviJogSel
Explanation:
Selects run mode or jog mode for the drive.
•
Jog reference frequency is defined by nciJogRef.
•
Start/stop jogging the drive with nviSpeedStpt.state.
•
For reverse operation, set (nviSpeedScale *
nviSpeedStpt.value) negative
Range:
0 = Run Mode
1 = Jog Mode
OCL Enable
Definition:
network input config SNVT_switch nviOCL_enable
Explanation:
Enables the Outer Control Loop (OCL).
Range:
0 = Disabled
1 = Enabled
Advertising