Rockwell Automation 1768-EWEB EtherNet/IP Web Server Module User Manual - Manual (Page 158)

Publication ENET-UM527E-EN-P - October 2006
158 Socket Interface
Socket Object Class Attributes
The Class attributes apply to the Socket Object, not to specific socket
instances. When you get or set a Class attribute, set the instance to 0.
If you use Get Attributes All to get the class attributes, the response
contains all of the above attributes, in the order shown above (total
size of 10 bytes). Since there is only one attribute (Log Enable) a Set
Attributes All request contains only the Log Enable attribute.
Class
Attribute Name Data Type Access Description
1 Revision INT Get Object revision
2 Max Instance INT Get Largest socket instance number currently created
3 Number of Instances INT Get Number of socket instances currently created
8 Log Enable DINT Get
Set
Enable or disable logging to the Socket Object Log web page.
Each socket service has a corresponding bit. If enabled,
requests for that service request are logged. If clear, then
requests for that service are not logged.
Bit 0: CreateSocket requests
Bit 1: OpenConnection requests
Bit 2: AcceptConnection requests
Bit 3: Read requests
Bit 4: Write requests
Bit 5: DeleteSocket and DeleteAllSockets requests
Bit 6: Get / Set Attribute requests
Bit 7: Log all service errors