1768-eweb installation – Rockwell Automation 1768-EWEB EtherNet/IP Web Server Module User Manual User Manual
Page 18
Advertising
Publication ENET-UM527E-EN-P - October 2006
18 Getting Started
1768-EWEB Installation
To install a CompactLogix Enhanced web Server module, complete
the following steps.
1. Open the DIN rail latches on the module.
2. Align and press the module onto the DIN rail to the left of the
controller.
3. Slide module snugly against the controller.
4. Install a power supply and other modules.
5. Close all the DIN rail latches.
6. Obtain an IP address.
For more information, see chapter 2.
Advertising
This manual is related to the following products: