Rockwell Automation 1768-EWEB EtherNet/IP Web Server Module User Manual - Manual (Page 69)

Publication ENET-UM527E-EN-P - October 2006
Send Email 69
Configure the Web Server
to Send Email The web server module uses the standard SMTP protocol to forward
an email to a mail relay server. You must configure the web server
module to recognize the appropriate mail relay server.
Some mail servers require a domain name be provided during the
initial handshake of the SMTP session. For these mail servers, make
sure you specify a domain name when you configure the network
settings for the module.
You configure the SMTP server and domain name by selecting
Administrative Settings
> Device Configuration > Email Configuration.
Enter the address of the SMTP server that manages email. You can
also select whether the web server module should authenticate to the
SMTP server. The web server module supports only LOGIN
authentication. Check with your network administrator for more
information.