Rockwell Automation 1768-EWEB EtherNet/IP Web Server Module User Manual - Manual (Page 34)

Publication ENET-UM527E-EN-P - October 2006
34 Configure a Network Address For a Web Server Module
If your network configuration requires a static IP address, configure
the IP address by selecting Administrative Settings
> Device
Configuration
> Network Configuration.
1. Access the Network Configuration page.
2. Enter the static IP address
3. Select Static for the Ethernet Interface Configuration
IMPORTANT
Do not simply configure the initial address assigned by the DHCP
server as a static IP address. Contact your network administrator for
an appropriate static IP address.