Rockwell Automation 1768-EWEB EtherNet/IP Web Server Module User Manual - Manual (Page 97)

Publication ENET-UM527E-EN-P - October 2006
Create Custom Web Pages 97
Retrieve Information About
the Web Server Module You can retrieve specific information about the web server module.
Function: GetSetting (settingname)
The GetSetting function retrieves a specific piece of information
about the web server module itself and writes this data to the browser.
Parameters:
where settingname can be:
Parameter Description
settingname The settingname specifies the piece of information to retrieve.
Value Description
“uptime”“device_status”
“firmware_revision”“firmware_version”
“serial_number” These fields as displayed on the predefined home page.
See page 22 for more information.
“name”“description”
“location”“contact1”
“contact2” These fields as configured on the Administrative Settings
→
Device Configuration
→
Device Identity page.
See page 48 for more information.
“ip_address”“subnet_mask”
“default_gateway”“primary_name_server”
“secondary_name_server”“domain_name”
“hostname”“obtain_configuration”
“dns_enable”“smtp_server”
“ethernet_address”“autonegotiation”
“port_speed”“duplex_mode” These fields as configured on the Administrative Settings
→
Device Configuration
→
Network Configuration page.
See page 49 for more information.
“cpu_utilization”“file_sys_utilization”
“server_errors”“server_redirects”
“server_timeouts”“server_access_violations”
“server_page_hits”“server_form_hits”
“server_total_hits”“user_free_space”
“server_data_views”“server_total_tags”
“tcp_conns”“tcp_conn_limit”
“tcp_max_conns”“cip_conns”
“cip_conn_limit”“cip_max_conns”
“cip_conn_opens”“cip_conn_open_errors”
“cip_conn_closes”“cip_conn_close_errors”
“cip_conn_timeouts”“cip_msg_sent”
“cip_msg_rcv”“cip_ucmm_sent”
“cip_ucmm_rcv” The diagnostic information on the Diagnostics
→
Diagnostic
Overview page.
See page 114 for more information.