Rockwell Automation 1768-EWEB EtherNet/IP Web Server Module User Manual User Manual

Page 32

Advertising
background image

Publication ENET-UM527E-EN-P - October 2006

32 Configure a Network Address For a Web Server Module

If you use the module to initiate MSG instructions that use host names
or to initiate emails, you must also define these parameters.

Check with your network administrator to determine if you need to
specify all of the above parameters.

How you configure these network parameters depends on whether
the Ethernet network has a DHCP server.

Assign Network
Parameters When the
Network Has a DHCP
Server

By default, the web server module is DHCP enabled. DHCP (Dynamic
Host Configuration Protocol) software automatically assigns IP
addresses to client stations logging onto a TCP/IP network.

If you connect the web server module to a network that has a DHCP
server, that server will assign an IP address to the web server module
and the four-digit display on the front of the web server module will
display each of the four numbers of the IP address.

In the Address field of your web browser, enter the IP address that
displays on the front of the module.

Ethernet Parameter

Description

Host Name

A host name is part of a text address that identifies the host for a module. The full text
address of a module is host_name.domain_name.

Domain Name

A domain name is part of a text address that identifies the domain in which the module
resides. The full text address of a module is host_name.domain_name. The domain name
has a 48-character limit.

If you specify a DNS server, you must enter a domain name. Also, if you send email from
the module, some mail relay servers require a domain name be provided during the initial
handshake of the SMTP session.

Primary DNS Server Address

This identifies the DNS server(s), if used in the network. You must have a DNS server
configured if you specified a domain name or a host name in the module’s configuration.
The DNS server converts the domain name or host name to an IP address that can be used
by the network.

Secondary DNS Server Address

Advertising
This manual is related to the following products: